Lubricants and Heat Transfer FluidsSolutions for Applications
Wir helfen gerne! We like to help!

Business Units

Heat Transfer Fluids

Phone: +49 (0)208-300 02-50
Fax: +49 (0)208-300 02-33
Email: waermetraegerfragol.de

Lubricants

Phone: +49 (0)208-300 02-40
Fax: +49 (0)208-300 02-77
Email: lubesfragol.de

Office

Phone: +49 (0)208-300 02-25
Fax: +49 (0)208-300 02-31
Email: rewefragol.de

Please use our contact form

FRAGOLTHERM® S-15-A

Heat transfer fluid from -35°C to 205°C

FRAGOLTHERM® S-15-A is a heat transfer fluid based on polykylene glycol that is used in a range from -130°C to 205°C. The maximum permissible film temperature is 215°C.

Application Area

Application

Very good pumpability is guaranteed even at low temperatures, due to the exceptional viscosity behavior. The thermal conductivity is over a wide temperature range constant. It is used for example in plastic processing machines, mould preheating devices, systems for processing synthetic textile fibres and chemical plants.

The majority of standard sealing materials are resistant to FRAGOLTHERM® S-15-A, is cold water-soluble. This is significant if a system is to be rinsed with water, or parts that have been temperature controlled with the heat transfer fluid In the event of fires breaking out these can be extinguished with water.

FRAGOLTHERM® S-15-A is cold water-soluble. This is significant if a system is to be rinsed with water, or parts that have been temperature controlled with the heat transfer fluid In the event of fires breaking out these can be extinguished with water.

FRAGOLTHERM® S-15-A is a water-free yet water-soluble synthetic heat transfer fluid from polyaklyene glycol derivatives, which lies in its optimum working range with bulk temperatures of between 100°C and 240°C. Within this temperature range this heat carrier is superior to other heart transfer fluid in terms of keeping the system clean, even if their maximum permissible bulk temperatures are higher.

FRAGOLTHERM® S-15-A also contains special anti-aging agents. Decomposition products are either volatile constituents or constituents that are soluble in the heat transfer fluid. Heat-conducting surfaces therefore remain free from residual products.

Technical Data

Heat transfer fluids business unit

You have questions?

 

Please use our contact form.